Comparing Selected Estimate Lines to a Recycled Assembly

This feature enables you to select one or more estimate lines and compare its cost to a recycled assembly replacement. When you select an available recycled part, associated costs automatically fill the appropriate fields. You can change these values if you want to.

After you select a recycled part, the Recycled Assembly and Difference fields at the bottom of the screen are populated.

To compare selected estimate lines to a recycled assembly

1. Open the workfile, and then select the Estimate tab >  Lines tab.
2. Select the MOTOR tab, and then select a group, and then a subgroup.
3. Select a sheet metal part from the database, and then select the Replace operation. The selected part is added to the estimate.
4. Select Compare Assembly from the operations toolbar. The Compare Recycled Assembly - Estimate tab screen opens.
5. Press the Ctrl key and click on the estimate lines in the Current Estimate pane you want use to make the part comparison, and then select the Recycled Assembly tab.
6. Enter a part description in the Description field, and then select the search button. The Select Recycled Parts screen opens.
7. Select the supplier, and then select the recycled assembly.
8. Enter the values for Cost $, Markup %, Labor Hours, or Paint Hours.
9. Click OK. The Select Recycled Parts screen closes.
10. Compare the values from the Current Estimate vs. Recycled Parts pane in the Compare Recycled Assembly screen.
11. Select Replace with Recycled to add the recycled part to the estimate. This also removes the selected estimate lines used for comparison.

© 2024 CCC Intelligent Solutions Inc. All Rights Reserved. CCC, CCC ONE, and the CCC Logo are registered trademarks of CCC Intelligent Solutions Inc. 9/16/2024 - 4:35 PM